Control Placement in PowerPoint Slides by Nudging Objects

After you place a graphic object on a PowerPoint slide, adjust its location to place it on the slide just right. To move the object slightly, nudge the object using common keystrokes to move it just a little bit in any direction.

Nudge an Object in PowerPoint

When you nudge an object in PowerPoint, the object moves in small increments. The direction the object moves depends on which arrow key you press. Select the object then use the arrow keys on your keyboard to move the object left, right, up, or down until it's positioned exactly where you want it.

If the default PowerPoint setting for nudging is too large for a specific need, manually adjust the increments of movement. Press and hold Ctrl while pressing the arrow keys to move in 1.25-point increments.

Reduce Default Nudge Setting

When you first install PowerPoint, the Snap Object to Grid feature is turned on. This setting determines the distance for the nudge as well.

The default nudge setting is six points when Snap Objects to Grid is turned on. If you turn off Snap Objects to Grid, the nudge default setting is 1.25 points. To turn Snap Objects to Grid off:

1. Go to View.

2. Select Grid Settings in the lower-right corner of the Show group.

3. Remove the check mark beside Snap objects to grid to turn off the feature and reduce the default nudge setting to 1.25 points.

4. Select OK.

Objects and Arrows

In addition to using Ctrl to modify an arrow press to decrease the nudge size, press the Alt key with the left and right arrows to rotate the object left or right.

Press Shift plus either the down or left arrow to make the object smaller, or Shift plus the right or up arrow to make it bigger. Similarly, using Ctrl+Shift makes the size of the increase or decrease smaller to permit more granular keyboard edits.